ensldees +386 (0) 1 837 00 20 anis@anis-trend.com
Customer portal Distributor login
  • English
  • Slovenščina
  • Deutsch
  • Español
ensldees +386 (0) 1 837 00 20 anis@anis-trend.com
Customer portal Distributor login
  • English
  • Slovenščina
  • Deutsch
  • Español
Certified
ISO9001
Service & Support
Trouble-shooting 24/7
350+ installations
around the world
Get A Quote
Anis Trend > Accessories for easier maintenance of the baler > Protective Finish (standard /extra painting)
D.2.

Protective Finish (standard /extra painting)

The equipment / installation is finished with a two layers paint system for the corrosion protection.

All surfaces are degreased and mechanically cleaned / sandblasted to give a perfect surface finish for the paint system.

The first coat is a corrosion-resistant primer zinc-phosphate. The second layer is a durable silky gloss two compound paint (RAL 5015 –blue). All guarding etc. is painted yellow (RAL 1016).

The dry film thickness is an average of 100-120 microns. Standard components such as, side panels of conveyors are given a preliminary coat of a primer paint then a final paint finish of at least 75 microns thick. Other unpainted parts, such as exposed shafts etc., are treated for transportation / storage etc. with a corrosion resistant protective finish ie.: Grease, oil or a Vaseline spray.

Some critical parts are hot dip galvanized to protect the baler from corrosion caused by organic fraction of waste.

D.2.1 Additional layer of paint

Optionally the additional layer of paint with the dry film thickness (160µm) is possible according to the customers requirements.

D.2.2 Extra colour of coating

Optionally the extra coating colour is possible according to the customers requirements.