ensldees +386 (0) 1 837 00 20 [email protected]
Distributor login
  • English
  • Slovenščina
  • Deutsch
  • Español
ensldees +386 (0) 1 837 00 20 [email protected]
Distributor login
  • English
  • Slovenščina
  • Deutsch
  • Español
Certified
ISO9001
Service & Support
Trouble-shooting 24/7
350+ installations
around the world
Get A Quote

Clothing Baler

Collectors of Waste Clothing and Textile

A clothing baler, also called a textile baler, compresses used clothing and textiles into dense, tied bales that are easy to store, handle and ship. Clothing baling generally refers to the baling of used clothing that will be shipped to developing countries for re-use, so this market requires dense bales without damaging the clothing during baling.

ANIS offers the no-shear, mid-range to high-volume Single Pre-press Flap Baler series with special features for this clothing application, including a pre-compression lid. The clothing bales from this baler series load well into sea containers, which generally results in a lower shipping cost per tonne. The automatic tying option increases production and eliminates most of the operator involvement.

Why a pre-press baler without shear blades suits clothing

The single pre-press flap closes the feed opening before the main ram completes the compression cycle, so the material is folded into the pressing chamber instead of being cut off. In the no-shear version there are no knives on the main press, so garments are not cut at the feed opening and there are no blades to sharpen or replace. The pre-compression flap works with peaks of 60 tonnes and increases the material density in the pressing chamber by 30%, which reduces the number of cycles per bale.

Specifications for textile baling

  • Pressing force: 60–142 tonnes
  • Bale size: 1,100 x 750 mm or 1,100 x 1,100 mm
  • Feed opening length: 1,600 mm, with a hopper tailored for manual or automatic feeding
  • Power units: 45 kW, 55 kW, 2 x 30 kW, 75 kW or 2 x 55 kW
  • Tying: fully automatic, for steel or plastic wire, with horizontal or vertical tying

Performance rates, bale weights and bale densities depend on the material, its moisture content and infeed density.

How to choose a clothing baler

  • Volume: the Single Pre-press Flap series is built for mid-range to high volumes; it can be fed manually or with a feed conveyor.
  • Shipping: if the bales are exported in sea containers, choose the bale size that fills your containers best, because dense bales lower the shipping cost per tonne.
  • Tying: horizontal tying keeps wire changes and cleaning at operator height; vertical tying allows 5 wires instead of 4 on 110 x 75 cm bales.
  • Several grades: the Siemens touch panel stores a recipe for each material, so the operator only selects the grade and the baler sets the right parameters.

To see how the tying unit works, read about our automatic baler wire tying system.

Textile Clothing Baler

anis-logo
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.