ensldees +386 (0) 1 837 00 20 anis@anis-trend.com
Distributor login
  • English
  • Slovenščina
  • Deutsch
  • Español
ensldees +386 (0) 1 837 00 20 anis@anis-trend.com
Distributor login
  • English
  • Slovenščina
  • Deutsch
  • Español
Certified
ISO9001
Service & Support
Trouble-shooting 24/7
350+ installations
around the world
Get A Quote

Baler for Printers and Converters

Printers / Converters

Printers / Converters need to bale shreds, edge trim, tissue logs, and other grades.

Profitability is the key to any successful manufacturing operation and the management of waste and recycling or converting of materials to extract their maximum asset value is a major factor in this process.

ANIS has several baler models that bale shredded, trimmed and air-fed grades effectively, producing export-quality bales.

All the baler series are equipped with shear blades and are customized for baling edge trim material:

  • Effective skimmers reduce the accumulation of small trims at the rear part of the machine. 
  • The baler’s construction enables small trims to automatically fall out and therefore makes cleaning up a simple process. 
  • It is possible to install additional bars that prevent trims from falling out due to chamber overpressure resulting from the suction transport system. 
  • The main press ram stops at the front position to prevent trims from rejecting.

Waste Balers for:

  • Printers / Converters / Manufacturers
  • Hygienic Paper Manufacturers